CAT

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 33 PI...

The Engine Control Module (ECM) detects the following conditions: •Actual boost is less than desired boost by more than 30 kPa (4.4 psi) for more than eight seconds.•The current for...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 32 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal frequency from the accelerator pedal position sensor is less than 150 Hz or the signal frequency is greater than...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 32 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal frequency from the accelerator pedal position sensor is less than 150 Hz or the signal frequency is greater than...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 31 PI...

The ECM detects the following conditions: •The vehicle speed signal indicates that the vehicle speed is 0 MPH.•Desired engine speed is greater than the programmed “VSL Protection”.•The “VSL Protection” parameter...