Cumminz

Cummins ISM CM870 (2003-06) Fault Code: 295 PID...

At key-on, before the engine starts, the sensor readings for intake manifold pressure, exhaust gas pressure, and engine oil pressure are compared with the barometric pressure. This fault code occurs...

Cummins ISM CM870 (2003-06) Fault Code: 288 PID...

If the OEM vehicle electronic control unit detects an error with the remote accelerator, it transmits an error message to the ECM. This fault code is set active when the...

Cummins ISM CM870 (2003-06) Fault Code: 287 PID...

If the OEM vehicle electronic control unit detects an error with the accelerator pedal sensor, it transmits an error message to the ECM. This fault code is set active when...

Cummins ISM CM870 (2003-06) Fault Code: 286 PID...

This fault can occur when the ECM is set up properly (components enabled and OEM VECU source addressed correctly) to receive information from an OEM VECU, but the OEM VECU...

Cummins ISM CM870 (2003-06) Fault Code: 285 PID...

When this fault code is active, some multiplexed devices can possibly not function as desired. Possible causes: 1)When the ECM is set up properly (components enabled and OEM VECU source...

Cummins ISM CM870 (2003-06) Fault Code: 284 PID...

The ECM monitors the voltage level on the engine speed sensor +5 volt supply circuit. If voltage falls below a calibratible limit then this fault is recorded. Possible causes: 1)...