Cumminz

Cummins ISB4.5 CM2150 Fault Code: 212 PID: 175 ...

Circuit DescriptionThe engine oil temperature sensor is a variable resistor sensor and is used to measure the temperature of the engine oil in the oil rifle. The electronic control module...

Cummins ISB4.5 CM2150 Fault Code: 212 PID: 175 ...

Circuit DescriptionThe engine oil temperature sensor is a variable resistor sensor and is used to measure the temperature of the engine oil in the oil rifle. The electronic control module...

Cummins ISB4.5 CM2150 Fault Code: 1993 PID: SPN...

Circuit DescriptionThe engine aftertreatment system monitors for the presence of the aftertreatment diesel particulate filter. This diagnostic checks to make sure that the aftertreatment diesel particulate filter is present and...

Cummins ISB4.5 CM2150 Fault Code: 1993 PID: SPN...

Cummins ISB4.5 CM2150 Fault Code: 1981 PID: SPN...

Circuit DescriptionThe engine aftertreatment system monitors the soot load in the aftertreatment diesel particulate filter. Under normal operating conditions, the aftertreatment diesel particulate filter is self-cleaning, where soot is converted...

Cummins ISB4.5 CM2150 Fault Code: 1981 PID: SPN...

Cummins ISB4.5 CM2150 Fault Code: 197 PID: 2560...

Circuit DescriptionThe coolant level sensor is a switch and is used to measure the level of the engine coolant in the radiator top tank. The coolant level sensor is immersed...

Cummins ISB4.5 CM2150 Fault Code: 197 PID: 2560...

Circuit DescriptionThe coolant level sensor is a switch and is used to measure the level of the engine coolant in the radiator top tank. The coolant level sensor is immersed...

Cummins ISB4.5 CM2150 Fault Code: 1962 PID: SID...

Circuit DescriptionThe variable geometry turbocharger (VGT) is electronically activated by the VGT actuator. The VGT actuator is a smart device and receives information via the J1939 data link from the...

Cummins ISB4.5 CM2150 Fault Code: 1962 PID: SID...

Cummins ISB4.5 CM2150 Fault Code: 196 PID: 2558...

Circuit DescriptionThe electronic control module (ECM) provides a 5 volt supply to the engine coolant level sensor using a common sensor supply circuit. The ECM also provides a ground on...

Cummins ISB4.5 CM2150 Fault Code: 196 PID: 2558...

Circuit DescriptionThe electronic control module (ECM) provides a 5 volt supply to the engine coolant level sensor using a common sensor supply circuit. The ECM also provides a ground on...