Cumminz

Cummins ISB4.5 CM2150 Fault Code: 125 PID: 102 ...

Intake Manifold 1 Pressure – Data Valid But Below Normal Operating Range – Moderately Severe Level CIrcuit DescriptionThe engine control module (ECM) provides a 5 volt supply to the intake...

Cummins ISB4.5 CM2150 Fault Code: 125 PID: 102 ...

Intake Manifold 1 Pressure – Data Valid But Below Normal Operating Range – Moderately Severe Level CIrcuit DescriptionThe engine control module (ECM) provides a 5 volt supply to the intake...

Cummins ISB4.5 CM2150 Fault Code: 1242 PID: 91 ...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 1242 PID: 91 ...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 1241 PID: SPN...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 1241 PID: SPN...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 1239 PID: SPN...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 1239 PID: SPN...

Circuit DescriptionThe accelerator position sensor is a Hall effect sensor attached to the accelerator pedal. The accelerator position sensor varies the signal voltage to the engine control module (ECM) as...

Cummins ISB4.5 CM2150 Fault Code: 123 PID: 102 ...

Circuit DescriptionThe engine control module (ECM) provides a 5 volt supply to the intake manifold pressure sensor on the sensor supply circuit. The ECM also provides a ground on the...

Cummins ISB4.5 CM2150 Fault Code: 123 PID: 102 ...

Circuit DescriptionThe engine control module (ECM) provides a 5 volt supply to the intake manifold pressure sensor on the sensor supply circuit. The ECM also provides a ground on the...

Cummins ISB4.5 CM2150 Fault Code: 1228 PID: 27 ...

Circuit DescriptionThe engine control module (ECM) uses the exhaust gas recirculation (EGR) valve position sensor to determine whether or not the EGR valve is meeting the commanded position. The ECM...

Cummins ISB4.5 CM2150 Fault Code: 1228 PID: 27 ...

Circuit DescriptionThe engine control module (ECM) uses the exhaust gas recirculation (EGR) valve position sensor to determine whether or not the EGR valve is meeting the commanded position. The ECM...

View all