CAT

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 02 PI...

The ECM detects the following conditions: •The unswitched battery connection has been disconnected from the ECM. Probable Causes: 1) ECM Connection/harness2) Battery voltage at ECM3) Truck battery or battery cable...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 02 PI...

The ECM detects the following conditions: •The unswitched battery connection has been disconnected from the ECM. Probable Causes: 1) ECM Connection/harness2) Battery voltage at ECM3) Truck battery or battery cable...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 01 PI...

The Engine Control Module (ECM) detects one of the following conditions: •The “Allow Idle Shutdown Override” parameter is programmed to “Yes” and the status of the brake switch or the...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 01 PI...

The Engine Control Module (ECM) detects one of the following conditions: •The “Allow Idle Shutdown Override” parameter is programmed to “Yes” and the status of the brake switch or the...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The vehicle speed slows at a rate that exceeds the “Quick Stop Rate” that is programmed.•The service brake is applied. Probable...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The vehicle speed slows at a rate that exceeds the “Quick Stop Rate” that is programmed.•The service brake is applied. Probable...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the ambient air temperature sensor is less than 0.2 VDC for more than eight seconds.•The “Allow Idle...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the ambient air temperature sensor is less than 0.2 VDC for more than eight seconds.•The “Allow Idle...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The ECM detects the following conditions: •The signal voltage from the ambient air temperature sensor is greater than 4.92 VDC for more than eight seconds.•The “Allow Idle Shutdown Override” parameter...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The ECM detects the following conditions: •The signal voltage from the ambient air temperature sensor is greater than 4.92 VDC for more than eight seconds.•The “Allow Idle Shutdown Override” parameter...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM is not receiving information about the ambient air temperature from the SAE J1587 data link. Probable Causes: 1) ECM...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM is not receiving information about the ambient air temperature from the SAE J1587 data link. Probable Causes: 1) ECM...

View all