CAT

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 24 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the engine oil pressure sensor is greater than 4.95 VDC for more than eight seconds.•The ECM has...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 24 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the engine oil pressure sensor is greater than 4.95 VDC for more than eight seconds.•The ECM has...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 8 volt supply is less than 7.5 VDC for more than one second.•The ECM has been powered for more than...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 8 volt supply is less than 7.5 VDC for more than one second.•The ECM has been powered for more than...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 8 volt supply is more than 8.5 VDC for more than one second.•The ECM has been powered for more than...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 8 volt supply is more than 8.5 VDC for more than one second.•The ECM has been powered for more than...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 5 volt supply is less than 4.84 VDC for more than one second.•The ECM has been powered for at least...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 5 volt supply is less than 4.84 VDC for more than one second.•The ECM has been powered for at least...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 5 volt supply is greater than 5.16 VDC for more than one second.•The ECM has been powered for at least...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 21 PI...

The Engine Control Module (ECM) detects the following conditions: •The 5 volt supply is greater than 5.16 VDC for more than one second.•The ECM has been powered for at least...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 14 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM detects a high current condition (short circuit) for one second while the ECM is attempting to energize the solenoids...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 14 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM detects a high current condition (short circuit) for one second while the ECM is attempting to energize the solenoids...