CAT

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 24 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the engine oil pressure sensor is less than 0.2 VDC for more than eight seconds.•The ECM has...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 24 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the engine oil pressure sensor is less than 0.2 VDC for more than eight seconds.•The ECM has...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 26 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 26 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 26 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 26 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the boost pressure sensor is greater than 4.95 VDC for more than two seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the boost pressure sensor is greater than 4.95 VDC for more than two seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the boost pressure sensor is greater than 4.95 VDC for more than two seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the boost pressure sensor is greater than 4.95 VDC for more than two seconds.•The ECM has been...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The ECM detects the following conditions: •The actual boost pressure is higher than the desired boost pressure. The engine may experience low power when the diagnostic code is active. Probable...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PI...

The ECM detects the following conditions: •The actual boost pressure is higher than the desired boost pressure. The engine may experience low power when the diagnostic code is active. Probable...