CAT
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 56 PI...
This condition indicates that the “Transmission Style” parameter is programmed to the Eaton Top 2 and any one of the following parameters are not programmed: •”Auxiliary Output 2″ (Multi-Function Output...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 56 PI...
This condition indicates that the “Transmission Style” parameter is programmed to the Eaton Top 2 and any one of the following parameters are not programmed: •”Auxiliary Output 2″ (Multi-Function Output...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 51 PI...
This condition indicates that the battery circuit to the Engine Control Module (ECM) has a battery condition that is intermittent while the engine is running. If battery voltage disappears without...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 51 PI...
This condition indicates that the battery circuit to the Engine Control Module (ECM) has a battery condition that is intermittent while the engine is running. If battery voltage disappears without...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 47 PI...
The ECM detects the following conditions: •The timer for the PTO has expired and the engine has shut down. Probable Causes: 1) ECM Connection/Harness2) PTO timer programmed incorrectly3) PTO timer...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 47 PI...
The ECM detects the following conditions: •The timer for the PTO has expired and the engine has shut down. Probable Causes: 1) ECM Connection/Harness2) PTO timer programmed incorrectly3) PTO timer...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 47 PI...
The ECM detects the following conditions: •The idle shutdown timer has expired and the engine has shut down. Probable Causes: 1) It code 84-08 is active, Idle Shutdown Timer will...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 47 PI...
The ECM detects the following conditions: •The idle shutdown timer has expired and the engine has shut down. Probable Causes: 1) It code 84-08 is active, Idle Shutdown Timer will...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 46 PI...
The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...
CAT 3406E (Prefix 1MM or 2WS) Fault Code: 46 PI...
The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...