CAT

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The vehicle speed slows at a rate that exceeds the “Quick Stop Rate” that is programmed.•The service brake is applied. Probable...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

This code indicates that the engine was shutdown due to an engine overspeed condition. Probable Failures: 1) Talk to the driver.2) If no driver error, issue may be in the...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

This code indicates that the engine was shutdown due to an engine overspeed condition. Probable Failures: 1) Talk to the driver.2) If no driver error, issue may be in the...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The status of the service brake pedal position switch 1 and the service brake pedal position switch 2 do not match...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The status of the service brake pedal position switch 1 and the service brake pedal position switch 2 do not match...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The status of the service brake pedal position switch 1 and the service brake pedal position switch 2 do not match...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The status of the service brake pedal position switch 1 and the service brake pedal position switch 2 do not match...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The engine is cranking.•The theft deterrent is active. The diagnostic code is active only. The diagnostic code will be active when...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started. Note: This diagnostic code...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started. Note: This diagnostic code...