CAT

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the ambient air temperature sensor is less than 0.2 VDC for more than eight seconds.•The “Allow Idle...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The ECM detects the following conditions: •The signal voltage from the ambient air temperature sensor is greater than 4.92 VDC for more than eight seconds.•The “Allow Idle Shutdown Override” parameter...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM is not receiving information about the ambient air temperature from the SAE J1587 data link. Probable Causes: 1) ECM...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

The Engine Control Module (ECM) detects the following conditions: •The ECM is not receiving information about the ambient air temperature from the SAE J1587 data link. Probable Causes: 1) ECM...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

This code indicates that the engine has run above 95% of full power for more than 15 minutes in a one hour period. The engine will be derated in order...

CAT 3406E (Prefix 1MM or 2WS) Fault Code: 00 PI...

This code indicates that the engine has run above 95% of full power for more than 15 minutes in a one hour period. The engine will be derated in order...

CAT 3126E Fault Code: 96-04 PID: Flash Code 00 ...

The Engine Control Module (ECM) detects the following condition: •The primary fuel level signal voltage is below the acceptable range for more than ten seconds. The fuel level sensors are...

CAT 3126E Fault Code: 96-04 PID: Flash Code 00 ...

The Engine Control Module (ECM) detects the following condition: •The primary fuel level signal voltage is below the acceptable range for more than ten seconds. The fuel level sensors are...

CAT 3126E Fault Code: 96-03 PID: Flash Code 00 ...

The Engine Control Module (ECM) detects the following condition: •The primary fuel level signal voltage is above the acceptable range for more than ten seconds. The fuel level sensors are...

CAT 3126E Fault Code: 96-03 PID: Flash Code 00 ...

The Engine Control Module (ECM) detects the following condition: •The primary fuel level signal voltage is above the acceptable range for more than ten seconds. The fuel level sensors are...