CAT

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PI...

The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PI...

The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PI...

The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PI...

The Engine Control Module (ECM) detects the following conditions: • Oil pressure drops below factory limits for more than 8 seconds Probable Causes: 1) Low oil level2) Low oil pressure...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 42 PI...

The Engine Control Module (ECM) detects the following conditions: •A timing calibration has never been performed on a new ECM or the timing is off by more than three degrees....

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 42 PI...

The Engine Control Module (ECM) detects the following conditions: •A timing calibration has never been performed on a new ECM or the timing is off by more than three degrees....

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 41 PI...

The Engine Control Module (ECM) detects one of the following conditions: •The “Soft Vehicle Speed Limit” parameter is programmed to “No” and the vehicle speed exceeds the programmed “Vehicle Speed...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 41 PI...

The Engine Control Module (ECM) detects one of the following conditions: •The “Soft Vehicle Speed Limit” parameter is programmed to “No” and the vehicle speed exceeds the programmed “Vehicle Speed...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 38 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the intake manifold air temperature sensor is less than 0.2 VDC for more than eight seconds.•The ECM...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 38 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the intake manifold air temperature sensor is less than 0.2 VDC for more than eight seconds.•The ECM...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 38 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the intake manifold air temperature sensor is greater than 4.9 VDC for more than eight seconds.•Engine coolant...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 38 PI...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the intake manifold air temperature sensor is greater than 4.9 VDC for more than eight seconds.•Engine coolant...