CAT

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PI...

This condition indicates that the “Transmission Style” parameter is programmed to the Eaton Top 2 and any one of the following parameters are not programmed: •”Auxiliary Output 2″ (Multi-Function Output...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PI...

This condition indicates that the “Transmission Style” parameter is programmed to the Eaton Top 2 and any one of the following parameters are not programmed: •”Auxiliary Output 2″ (Multi-Function Output...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PI...

This condition indicates that the SAE J1939 Data Link is not communicating correctly. Probable Causes: 1) ECM Connection/Harness2) Another device on the J1939 is causing problems (ABS, VORAD, Cab controller,...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 56 PI...

This condition indicates that the SAE J1939 Data Link is not communicating correctly. Probable Causes: 1) ECM Connection/Harness2) Another device on the J1939 is causing problems (ABS, VORAD, Cab controller,...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 53 PI...

Conditions Which Generate This Code: This condition indicates an internal ECM problem. The vehicle needs a new ECM.

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 53 PI...

Conditions Which Generate This Code: This condition indicates an internal ECM problem. The vehicle needs a new ECM.

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 51 PI...

This condition indicates that the battery circuit to the Engine Control Module (ECM) has a battery condition that is intermittent while the engine is running. If battery voltage disappears without...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 51 PI...

This condition indicates that the battery circuit to the Engine Control Module (ECM) has a battery condition that is intermittent while the engine is running. If battery voltage disappears without...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PI...

The ECM detects the following conditions: •The timer for the PTO has expired and the engine has shut down. Probable Causes: 1) ECM Connection/Harness2) PTO timer programmed incorrectly3) PTO timer...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PI...

The ECM detects the following conditions: •The timer for the PTO has expired and the engine has shut down. Probable Causes: 1) ECM Connection/Harness2) PTO timer programmed incorrectly3) PTO timer...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PI...

The ECM detects the following conditions: •The idle shutdown timer has expired and the engine has shut down. Probable Causes: 1) It code 84-08 is active, Idle Shutdown Timer will...

CAT 3406E (Prefix 5DS or 1LW) Fault Code: 47 PI...

The ECM detects the following conditions: •The idle shutdown timer has expired and the engine has shut down. Probable Causes: 1) It code 84-08 is active, Idle Shutdown Timer will...

View all
View all