CAT
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 66 PI...
Conditions Which Generate This Code: The ECM detects the following conditions: •There is a low current condition (open circuit) in auxiliary output 02. Probable Causes: 1) ECM Connector/harness2) Shift solenoid...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 66 PI...
Conditions Which Generate This Code: The ECM detects the following conditions: •There is a low current condition (open circuit) in auxiliary output 02. Probable Causes: 1) ECM Connector/harness2) Shift solenoid...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 66 PI...
The ECM detects the following conditions: •There is a low current condition (open circuit) in auxiliary output 02. The solenoid that is currently enabled will remain in the ON position...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 66 PI...
The ECM detects the following conditions: •There is a low current condition (open circuit) in auxiliary output 02. The solenoid that is currently enabled will remain in the ON position...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 65 PI...
The Engine Control Module (ECM) detects the following conditions: •The fuel temperature is above 90 °C (194 °F) for more than 30 seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 65 PI...
The Engine Control Module (ECM) detects the following conditions: •The fuel temperature is above 90 °C (194 °F) for more than 30 seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 64 PI...
The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 64 PI...
The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 64 PI...
The ECM detects the following conditions: •The intake manifold air temperature is greater than 90 °C (194.0 °F) for more than four seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 64 PI...
The ECM detects the following conditions: •The intake manifold air temperature is greater than 90 °C (194.0 °F) for more than four seconds.•The engine has been running for at least...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 62 PI...
The Engine Control Module (ECM) detects the following conditions: •The coolant level is very low for more than 30 seconds.•The “Coolant Level Sensor” parameter is programmed to “Yes”. Probable Causes:...
CAT 3406E (Prefix 5DS or 1LW) Fault Code: 62 PI...
The Engine Control Module (ECM) detects the following conditions: •The coolant level is very low for more than 30 seconds.•The “Coolant Level Sensor” parameter is programmed to “Yes”. Probable Causes:...
-
Commins CaIterm v5.16 – Engine Calibration Software
Regular price $150.00 USDRegular price$200.00 USDSale price $150.00 USDSale -
Eaton Service Ranger v4.13 Diagnostic Software – Database v8852
Regular price $180.00 USDRegular priceSale price $180.00 USD -
John Deere Service Advisor 5.4.84 C&F 2026
Regular price $400.00 USDRegular priceSale price $400.00 USD -
John Deere Service Advisor 5.4.84 – AG & Turf Diagnostics
Regular price $400.00 USDRegular priceSale price $400.00 USD