Cumminz

Cummins ISM CM870 (2003-06) Fault Code: 223 PID...

This fault is logged when the ECM commands the Centinel? oil control valve ON and detects a lower signal voltage than expected at the output. Possible causes: 1)Short circuit to...

Cummins ISM CM870 (2003-06) Fault Code: 222 PID...

The barometric pressure sensor shares supply and return wires in the engine harness with other sensors. Opens and shorts in the engine harness can cause multiple fault codes to be...

Cummins ISM CM870 (2003-06) Fault Code: 2215 PI...

Verify the electronic control module (ECM) calibration is correct. It is possible to swap the connections between the aftertreatment fuel pressure sensor and the fuel delivery pressure sensor. If this...

Cummins ISM CM870 (2003-06) Fault Code: 221 PID...

The barometric pressure sensor shares supply and return wires in the engine harness with other sensors. Opens and shorts in the engine harness can cause multiple fault codes to be...

Cummins ISM CM870 (2003-06) Fault Code: 219 PID...

Verify that the makeup tank has the appropriate oil level. Possible repairs: 1)Replace the Centinel? oil burn level switch.2)Repair or replace the OEM harness.

Cummins ISM CM870 (2003-06) Fault Code: 214 PID...

The engine oil temperature sensor measures the temperature of the oil in the oil rifle on the left hand side of the engine block. This fault code is activated if...