CAT

CAT 3126E Fault Code: 30-08 PID: Flash Code 29 ...

The idle timer has expired to stop the engine. NOTE: This diagnostic code represents an event and not an Electronic System fault.

CAT 3126E Fault Code: 30-08 PID: Flash Code 29 ...

The idle timer has expired to stop the engine. NOTE: This diagnostic code represents an event and not an Electronic System fault.

CAT 3126E Fault Code: 3-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126E Fault Code: 3-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126E Fault Code: 253-14 PID: Flash Code 56...

The “Truck Manufacturer Parameter” has not been programmed. The parameter must be programmed for the manufacturer of the chassis in order to configure the correct options and ranges for the...

CAT 3126E Fault Code: 253-14 PID: Flash Code 56...

The “Truck Manufacturer Parameter” has not been programmed. The parameter must be programmed for the manufacturer of the chassis in order to configure the correct options and ranges for the...

CAT 3126E Fault Code: 253-02 PID: Flash Code 56...

The supply voltage for all engine sensors (except Speed/Timing and Throttle Position) is below normal level.

CAT 3126E Fault Code: 253-02 PID: Flash Code 56...

The supply voltage for all engine sensors (except Speed/Timing and Throttle Position) is below normal level.

CAT 3126E Fault Code: 252-11 PID: Flash Code 59...

The Boost Pressure signal voltage is above acceptable range.

CAT 3126E Fault Code: 252-11 PID: Flash Code 59...

The Boost Pressure signal voltage is above acceptable range.

CAT 3126E Fault Code: 247-11 PID: Flash Code 00...

Indicates the coolant Tempeature is above 226°F (106°C) on 3116 and 230°F (110°C) on 3126 engines. Engine Monitoring must be progammed to WARNING o DERATE before this diagnostic can occur....

CAT 3126E Fault Code: 247-11 PID: Flash Code 00...

Indicates the coolant Tempeature is above 226°F (106°C) on 3116 and 230°F (110°C) on 3126 engines. Engine Monitoring must be progammed to WARNING o DERATE before this diagnostic can occur....