CAT

CAT 3126E Fault Code: 224-14 PID: Flash Code 00...

The Engine Control Module (ECM) detects the following conditions: •The engine is cranking.•The theft deterrent is active. The diagnostic code is active only. The diagnostic code will be active when...

CAT 3126E Fault Code: 224-14 PID: Flash Code 00...

CAT 3126E Fault Code: 224-11 PID: Flash Code 00...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started.

CAT 3126E Fault Code: 224-11 PID: Flash Code 00...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started.

CAT 3126E Fault Code: 22-13 PID: Flash Code 42 ...

The Engine Control Module (ECM) detects the following conditions: •A timing calibration has never been performed on a new ECM or the timing is off by more than three degrees....

CAT 3126E Fault Code: 22-13 PID: Flash Code 42 ...

The Engine Control Module (ECM) detects the following conditions: •A timing calibration has never been performed on a new ECM or the timing is off by more than three degrees....

CAT 3126E Fault Code: 22-11 PID: Flash Code 42 ...

The Engine Control Module (ECM) detects the following conditions: •The primary speed/timing sensor and the secondary speed/timing sensor are off by more than three degrees.•A timing calibration has been successfully...

CAT 3126E Fault Code: 22-11 PID: Flash Code 42 ...

CAT 3126E Fault Code: 2-11 PID: Flash Code 72 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126E Fault Code: 2-11 PID: Flash Code 72 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...