CAT

CAT 3126E Fault Code: 110-04 PID: Flash Code 27...

The engine is running and status of Service Brake #2 Switch indicates the brake has been depressed while Service Brake #1 Switch indicates the pedal is released.

CAT 3126E Fault Code: 110-04 PID: Flash Code 27...

The engine is running and status of Service Brake #2 Switch indicates the brake has been depressed while Service Brake #1 Switch indicates the pedal is released.

CAT 3126E Fault Code: 110-03 PID: Flash Code 27...

The engine is running and status of Service Brake #1 Switch indicates the brake pedal has been depressed while Service Brake #2 Switch indicates the pdeal is released.

CAT 3126E Fault Code: 110-03 PID: Flash Code 27...

The engine is running and status of Service Brake #1 Switch indicates the brake pedal has been depressed while Service Brake #2 Switch indicates the pdeal is released.

CAT 3126E Fault Code: 110-00 PID: Flash Code 61...

The Boost Pressure signal voltage is below acceptable range.

CAT 3126E Fault Code: 110-00 PID: Flash Code 61...

The Boost Pressure signal voltage is below acceptable range.

CAT 3126E Fault Code: 108-04 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3126E Fault Code: 108-04 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3126E Fault Code: 108-03 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3126E Fault Code: 108-03 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3126E Fault Code: 105-11 PID: Flash Code 64...

The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...

CAT 3126E Fault Code: 105-11 PID: Flash Code 64...

The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...