CAT

CAT 3126E Fault Code: 105-04 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126E Fault Code: 105-04 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126E Fault Code: 105-03 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126E Fault Code: 105-03 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126E Fault Code: 105-00 PID: Flash Code 64...

The Engine Control Module (ECM) detects the following conditions: •The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).•The engine coolant temperature...

CAT 3126E Fault Code: 105-00 PID: Flash Code 64...

The Engine Control Module (ECM) detects the following conditions: •The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).•The engine coolant temperature...

CAT 3126E Fault Code: 102-7 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The signal for boost pressure has been more than 172 kPa (25 psi) for more than 0.5 seconds.•The fuel rate is...

CAT 3126E Fault Code: 102-7 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The signal for boost pressure has been more than 172 kPa (25 psi) for more than 0.5 seconds.•The fuel rate is...