CAT

CAT 3126B Fault Code: 111-03 PID: Flash Code 12...

Conditions Which Generate This Code: This condition occurs when there is an open in the circuit for the “2-wire float sensor”. The “Coolant Level Sensor” parameter must be programmed to...

CAT 3126B Fault Code: 111-03 PID: Flash Code 12...

Conditions Which Generate This Code: This condition occurs when there is an open in the circuit for the “2-wire float sensor”. The “Coolant Level Sensor” parameter must be programmed to...

CAT 3126B Fault Code: 111-02 PID: Flash Code 12...

The ECM detects the following conditions: •The coolant level sensor is sending an invalid signal for more than ten seconds.•The “Coolant Level Sensor” parameter is programmed to “Yes”. Probable Causes:...

CAT 3126B Fault Code: 111-02 PID: Flash Code 12...

CAT 3126B Fault Code: 111-01 PID: Flash Code 62...

The Engine Control Module (ECM) detects the following conditions: •For C7 engines that are not in emergency vehicles, the engine coolant temperature is at least 111° C (232° F) for...

CAT 3126B Fault Code: 111-01 PID: Flash Code 62...

The Engine Control Module (ECM) detects the following conditions: •For C7 engines that are not in emergency vehicles, the engine coolant temperature is at least 111° C (232° F) for...

CAT 3126B Fault Code: 110-11 PID: Flash Code 61...

The Engine Control Module (ECM) detects the following conditions: •For C7 engines that are not in emergency vehicles, the engine coolant temperature is at least 108° C (226° F) for...

CAT 3126B Fault Code: 110-11 PID: Flash Code 61...

The Engine Control Module (ECM) detects the following conditions: •For C7 engines that are not in emergency vehicles, the engine coolant temperature is at least 108° C (226° F) for...

CAT 3126B Fault Code: 110-04 PID: Flash Code 27...

The engine is running and status of Service Brake #2 Switch indicates the brake has been depressed while Service Brake #1 Switch indicates the pedal is released.

CAT 3126B Fault Code: 110-04 PID: Flash Code 27...

The engine is running and status of Service Brake #2 Switch indicates the brake has been depressed while Service Brake #1 Switch indicates the pedal is released.

CAT 3126B Fault Code: 110-03 PID: Flash Code 27...

The engine is running and status of Service Brake #1 Switch indicates the brake pedal has been depressed while Service Brake #2 Switch indicates the pdeal is released.

CAT 3126B Fault Code: 110-03 PID: Flash Code 27...

The engine is running and status of Service Brake #1 Switch indicates the brake pedal has been depressed while Service Brake #2 Switch indicates the pdeal is released.