CAT

CAT 3126B Fault Code: 110-00 PID: Flash Code 61...

The Boost Pressure signal voltage is below acceptable range.

CAT 3126B Fault Code: 110-00 PID: Flash Code 61...

The Boost Pressure signal voltage is below acceptable range.

CAT 3126B Fault Code: 108-04 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3126B Fault Code: 108-04 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is less than 0.2 VDC for more than 30 seconds.•The ECM has been...

CAT 3126B Fault Code: 108-03 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3126B Fault Code: 108-03 PID: Flash Code 26...

The Engine Control Module (ECM) detects the following conditions: •The signal voltage from the atmospheric pressure sensor is greater than 4.9 VDC for more than 30 seconds.•The ECM has been...

CAT 3126B Fault Code: 105-11 PID: Flash Code 64...

The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...

CAT 3126B Fault Code: 105-11 PID: Flash Code 64...

The ECM detects the following conditions: •The intake manifold air temperature is greater than 109 °C (228 °F) for more than two seconds.•The engine has been running for at least...

CAT 3126B Fault Code: 105-04 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126B Fault Code: 105-04 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126B Fault Code: 105-03 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126B Fault Code: 105-03 PID: Flash Code 38...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...