CAT

CAT 3126B Fault Code: 105-00 PID: Flash Code 64...

The Engine Control Module (ECM) detects the following conditions: •The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).•The engine coolant temperature...

CAT 3126B Fault Code: 105-00 PID: Flash Code 64...

The Engine Control Module (ECM) detects the following conditions: •The intake manifold air temperature is equal to 90 °C (194 °F) or above 90 °C (194 °F).•The engine coolant temperature...

CAT 3126B Fault Code: 102-7 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The signal for boost pressure has been more than 172 kPa (25 psi) for more than 0.5 seconds.•The fuel rate is...

CAT 3126B Fault Code: 102-7 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The signal for boost pressure has been more than 172 kPa (25 psi) for more than 0.5 seconds.•The fuel rate is...

CAT 3126B Fault Code: 102-4 PID: Flash Code 25 ...

Vehicle speed is changing faster than is possible. If the progammed VSL Protection is progammed to 3000 rpm this diagnostic will not occur.

CAT 3126B Fault Code: 102-4 PID: Flash Code 25 ...

Vehicle speed is changing faster than is possible. If the progammed VSL Protection is progammed to 3000 rpm this diagnostic will not occur.

CAT 3126B Fault Code: 102-3 PID: Flash Code 25 ...

Vehicle speed is greater than 127 mph (204 km/h) for at least two seconds.

CAT 3126B Fault Code: 102-3 PID: Flash Code 25 ...

Vehicle speed is greater than 127 mph (204 km/h) for at least two seconds.

CAT 3126B Fault Code: 102-2 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The difference between desired boost and actual boost is greater than 20 kPa (80 inch of H2O) for more than eight...

CAT 3126B Fault Code: 102-2 PID: Flash Code 25 ...

The Engine Control Module (ECM) detects the following conditions: •The difference between desired boost and actual boost is greater than 20 kPa (80 inch of H2O) for more than eight...

CAT 3126B Fault Code: 100-11 PID: Flash Code 46...

The Engine Control Module (ECM) detects the following conditions: •The engine oil pressure is below the trip line in Illustration 1 for more than eight seconds.•The engine has been running...

CAT 3126B Fault Code: 100-11 PID: Flash Code 46...

The Engine Control Module (ECM) detects the following conditions: •The engine oil pressure is below the trip line in Illustration 1 for more than eight seconds.•The engine has been running...