CAT

CAT 3126B Fault Code: 84-02 PID: Flash Code 36 ...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126B Fault Code: 84-02 PID: Flash Code 36 ...

The Ecm detects one of the following after attempting to actuacte the injector solenoid: – An open circuit in the injector wiring. – An internal open circuit in the injector...

CAT 3126B Fault Code: 84-01 PID: Flash Code 31 ...

A Customer Specified Parameter or a System Configuration Parameter requiring programming has not been programmed.

CAT 3126B Fault Code: 84-01 PID: Flash Code 31 ...

A Customer Specified Parameter or a System Configuration Parameter requiring programming has not been programmed.

CAT 3126B Fault Code: 84-00 PID: Flash Code 41 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 84-00 PID: Flash Code 41 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 71-14 PID: Flash Code 47 ...

The idle shutdown timer is intended to improve fuel economy by limiting idling time. The idle shutdown timer is a customer specified parameter that may be programmed for any period...

CAT 3126B Fault Code: 71-14 PID: Flash Code 47 ...

The idle shutdown timer is intended to improve fuel economy by limiting idling time. The idle shutdown timer is a customer specified parameter that may be programmed for any period...

CAT 3126B Fault Code: 71-01 PID: Flash Code 47 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 71-01 PID: Flash Code 47 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 71-0 PID: Flash Code 01 S...

The ECM has detected an engine speed in excess 3300rpm. NOTE: This diagnostic code is an event code indicating an excessive engine speed and not an electronic syystem malfunction.

CAT 3126B Fault Code: 71-0 PID: Flash Code 01 S...

The ECM has detected an engine speed in excess 3300rpm. NOTE: This diagnostic code is an event code indicating an excessive engine speed and not an electronic syystem malfunction.