CAT

CAT 3126B Fault Code: 70-06 PID: Flash Code 49 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 70-06 PID: Flash Code 49 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 70-05 PID: Flash Code 49 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 70-05 PID: Flash Code 49 ...

After attempting to actuate the Injector Solenoids the ECM has detected one of the following: -An electrical short circuit to ground (to the engine Iron). – An internal injector solenoid...

CAT 3126B Fault Code: 64-11 PID: Flash Code 34 ...

The Speed/Timing signal for Engine Speed/Timing Sensor #1 is lost and then returns (intermittent).

CAT 3126B Fault Code: 64-11 PID: Flash Code 34 ...

The Speed/Timing signal for Engine Speed/Timing Sensor #1 is lost and then returns (intermittent).

CAT 3126B Fault Code: 64-02 PID: Flash Code 34 ...

The Speed/Timing signal or Engine Speed/Timing Sensor #2 indicates rpm but timing pattern is lost.

CAT 3126B Fault Code: 64-02 PID: Flash Code 34 ...

The Speed/Timing signal or Engine Speed/Timing Sensor #2 indicates rpm but timing pattern is lost.

CAT 3126B Fault Code: 5-11 PID: Flash Code 74 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126B Fault Code: 5-11 PID: Flash Code 74 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126B Fault Code: 43-02 PID: Flash Code 71 ...

The Engine Control Module (ECM) detects that the keyswitch was cycled at least three times within one second. This indicates that the battery circuit to the keyswitch has an intermittent...

CAT 3126B Fault Code: 43-02 PID: Flash Code 71 ...

The Engine Control Module (ECM) detects that the keyswitch was cycled at least three times within one second. This indicates that the battery circuit to the keyswitch has an intermittent...