CAT

CAT 3126B Fault Code: 41-04 PID: Flash Code 21 ...

The throttle signal is less than 5% or more than 95%

CAT 3126B Fault Code: 41-04 PID: Flash Code 21 ...

The throttle signal is less than 5% or more than 95%

CAT 3126B Fault Code: 41-03 PID: Flash Code 21 ...

The ECM is not receiving a correct throttle signal

CAT 3126B Fault Code: 41-03 PID: Flash Code 21 ...

The ECM is not receiving a correct throttle signal

CAT 3126B Fault Code: 4-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126B Fault Code: 4-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126B Fault Code: 30-13 PID: Flash Code 29 ...

The Personality Module installed is for a different engine than the Personality Module it replaced. NOTICE: Do not attempt to install a 3126 Personality Mofule into a 3116 engine or...

CAT 3126B Fault Code: 30-13 PID: Flash Code 29 ...

The Personality Module installed is for a different engine than the Personality Module it replaced. NOTICE: Do not attempt to install a 3126 Personality Mofule into a 3116 engine or...

CAT 3126B Fault Code: 30-08 PID: Flash Code 29 ...

The idle timer has expired to stop the engine. NOTE: This diagnostic code represents an event and not an Electronic System fault.

CAT 3126B Fault Code: 30-08 PID: Flash Code 29 ...

The idle timer has expired to stop the engine. NOTE: This diagnostic code represents an event and not an Electronic System fault.

CAT 3126B Fault Code: 3-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...

CAT 3126B Fault Code: 3-11 PID: Flash Code 73 S...

The Engine Control Module (ECM) detects one of the following items after attempting to operate the injector: •A low current condition (open circuit) exists in the wiring for the cylinder...