CAT

CAT 3126B Fault Code: 253-14 PID: Flash Code 56...

The “Truck Manufacturer Parameter” has not been programmed. The parameter must be programmed for the manufacturer of the chassis in order to configure the correct options and ranges for the...

CAT 3126B Fault Code: 253-14 PID: Flash Code 56...

The “Truck Manufacturer Parameter” has not been programmed. The parameter must be programmed for the manufacturer of the chassis in order to configure the correct options and ranges for the...

CAT 3126B Fault Code: 253-02 PID: Flash Code 56...

The supply voltage for all engine sensors (except Speed/Timing and Throttle Position) is below normal level.

CAT 3126B Fault Code: 253-02 PID: Flash Code 56...

The supply voltage for all engine sensors (except Speed/Timing and Throttle Position) is below normal level.

CAT 3126B Fault Code: 252-11 PID: Flash Code 59...

The Boost Pressure signal voltage is above acceptable range.

CAT 3126B Fault Code: 252-11 PID: Flash Code 59...

The Boost Pressure signal voltage is above acceptable range.

CAT 3126B Fault Code: 247-11 PID: Flash Code 00...

Indicates the coolant Tempeature is above 226°F (106°C) on 3116 and 230°F (110°C) on 3126 engines. Engine Monitoring must be progammed to WARNING o DERATE before this diagnostic can occur....

CAT 3126B Fault Code: 247-11 PID: Flash Code 00...

Indicates the coolant Tempeature is above 226°F (106°C) on 3116 and 230°F (110°C) on 3126 engines. Engine Monitoring must be progammed to WARNING o DERATE before this diagnostic can occur....

CAT 3126B Fault Code: 246-11 PID: Flash Code 00...

Indicates the Coolant Temperature is above 221°F (105°C) on 3116 engines and 224°F (107°C) on 3216 engines. Engine Monitoring must be programmed to WARNING or DERATE before this diagnostic code...