CAT

CAT 3126B Fault Code: 232-03 PID: Flash Code 21...

The ECM does not detect vehicle speed when conditions indicate vehicle speed should be present. This diagnostic code will not occur if programmed to 3000 rpm and desird engine pm...

CAT 3126B Fault Code: 232-03 PID: Flash Code 21...

The ECM does not detect vehicle speed when conditions indicate vehicle speed should be present. This diagnostic code will not occur if programmed to 3000 rpm and desird engine pm...

CAT 3126B Fault Code: 231-12 PID: Flash Code 00...

The Engine Control Module (ECM) detects the following conditions: •The ECM is unsuccessful in receiving a message from a J1939 source.•The ECM is not receiving a valid message from a...

CAT 3126B Fault Code: 231-12 PID: Flash Code 00...

The Engine Control Module (ECM) detects the following conditions: •The ECM is unsuccessful in receiving a message from a J1939 source.•The ECM is not receiving a valid message from a...

CAT 3126B Fault Code: 231-11 PID: Flash Code 58...

This condition indicates that the SAE J1939 data link is not communicating correctly. The parameter “Powertrain Data Link” must be programmed to J1939. The power train data link is designed...

CAT 3126B Fault Code: 231-11 PID: Flash Code 58...

This condition indicates that the SAE J1939 data link is not communicating correctly. The parameter “Powertrain Data Link” must be programmed to J1939. The power train data link is designed...

CAT 3126B Fault Code: 231-02 PID: Flash Code 58...

This condition indicates that the J1939 data link is receiving information from a specified device but the information is incomplete or corrupted. The parameter “Powertrain Data Link” must be programmed...

CAT 3126B Fault Code: 231-02 PID: Flash Code 58...

CAT 3126B Fault Code: 224-14 PID: Flash Code 00...

The Engine Control Module (ECM) detects the following conditions: •The engine is cranking.•The theft deterrent is active. The diagnostic code is active only. The diagnostic code will be active when...

CAT 3126B Fault Code: 224-14 PID: Flash Code 00...

CAT 3126B Fault Code: 224-11 PID: Flash Code 00...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started.

CAT 3126B Fault Code: 224-11 PID: Flash Code 00...

The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent. Then, the engine can be started.